국제학술지 게재논문

2020

1. S. C. Kwon, M. S. Jo, D. H. Ko and H. U. Oh, “Viscoelastic Multilayered Blade-type Passive Vibration Isolation System for a Spaceborne Cryogenic Cooler”,              Cryogenics, Vol. 105 (2020) 1-16

2. T. Y. Park, S. Y. Kim, D. W. Yi, H. Y. Jung, J. E. Lee, J. H. Yun and H. U. Oh, "Thermal Design and Analysis of Unfurlable CFRP Skin-based Parabolic Reflector     for Spaceborne SAR Antenna", International Journal of Aeronautical and Space Sciences, (Accepted)

3. B. G. Chae and H. U. Oh, "Development of Power Plant Trio CanSat Platform Powered by Solar, Wind and Piezo Energy Harvesting Systems",
    International Journal of Aeronautical and Space Sciences, (Under Review)

4. S. Bhattarai, H. R. Kim and H. U. Oh, "CubeSat’s Deployable Solar Panel with Viscoelastic Multi-layered Stiffener for Launch Vibration Attenuation", 

    International Journal of Aerospace Engineering, (Under Review)

5. Y. H. Park, M. S. Jo and H. U. Oh, "Performance Enhancement of Spaceborne Cooler Passive Launch and On-Orbit Vibration Isolation System",

    International Journal of Aerospace Engineering, (Under Review)

2019

1. S. C. Kwon and H. U. Oh, "Passive Micro-jitter Isolation of Gimbal-type Antenna by Using a Superelastic SMA Gear Wheel",

    Mechanical Systems & Signal Processing, Vol. 114 (2019) 35-53

2. S. C. Kwon, J. Onoda and H. U. Oh, "Performance Evaluation of a Novel Piezoelectric-based High-frequency Surge-inducing Synchronized Switching Strategy for

     Micro-scale Energy Harvesting", Mechanical Systems & Signal Processing, Vol. 117 (2019) 361-382

3. T. Y. Park , B. G. Chae and H. U. Oh, "Development of 6U CubeSat’s Deployable Solar Panel with Burn Wire Triggering Holding and Release Mechanism"

     International Journal of Aerospace Engineering, Vol. 2019 (2019) 1-13

4. S. Bhattarai, H. Kim, S. H. Jung and H. U. Oh, "Development of Pogo Pin-Based Holding and Release Mechanism for Deployable Solar Panel of CubeSat"

     International Journal of Aerospace Engineering, Vol. 2019 (2019) 1-13

5. H. U. Oh, H. I. Kim, J. K. Kim, J. S. Choi and S. H. Kim, "Smartphone CanSat for Actualization of Real-time Streaming Video Calls Using Remote Screen Touch      System with Shape Memory Alloy Actuator", Transaction of the Japan Society for Aeronautical and Space Sciences, Vol. 62 No 5 (2019) 256-264

2018

1. S. C. Kwon, J. Onoda and H. U. Oh, "Improvement of Micro-jitter Energy Efficiency of Piezoelectric-based Surge-inducing Optimal Switching Strategy",

    Sensors and actuators: A PhysicalVol. 281 (2018) 55-66

2. T. Y. Park, J. C. Park and H. U. Oh, "Evaluation of Structural Design Methodologies for Predicting a Mechanical Reliability on Solder Joint of BGA and

    TSSOP under Launch Random Vibration Excitation", International Journal of Fatigue, Vol. 114 (2018) 206-216

3. T. Y. Park, S. H. Jeon, S. J. Kim and H. U. Oh, “Experimental Validation of Fatigue Life of CCGA 624 Package with Initial Contact Pressure of Thermal Gap

    Pads under Random Vibration Excitation”, International Journal of Aerospace Engineering, Vol. 2018 (2018) 1-12

4. T. Y. Park, S. H. Kim, H. Kim and H. U. Oh, “Experimental Investigation on the Feasibility of Using Spring-loaded Pogo Pin as a Holding and Release                         Mechanism for CubeSat’s Deployable Solar Panels”, International Journal of Aerospace Engineering, Vol. 2018 (2018) 1-10

5. T. Y. Park, J. J. Lee, J. H. Kim and H. U. Oh,“Preliminary Thermal Design and Analysis of Lunar Lander for Night Survival”,

    International Journal of Aerospace Engineering, Vol. 2018 (2018) 1-13

6. T. G. Kim and H. U. Oh, "Experimental Investigation of the Feasibility of Using a Liquid Metal as a Variable Conductance Radiator for Space Applications",

    Journal of Heat Transfer-transactions of the ASME, Vol. 141 (2018) 1-10

2017

1. H. U. Oh, T. G. Kim, S. H. Han and J. K. Lee, "Verification of MEMS Fabrication Process for the Application of MEMS Solid Propellant Thruster Arrays                   in Space through Launch and On-orbit Environment Tests", Acta Astronautica, Vol. 131 (2017) 28-35

2. S. H. Jeon, S. C. Kwon, T. H. Kim and H. U. Oh, "Enhancement of Microjitter Attenuation Capability for a Stepper-Actuated Two-Axis Gimbal Type Antenna

    by Using a Spring-Blade Isolator", International Journal of Aerospace Engineering, Vol. 30 No. 4 (2017) 1-9

3. T. Y. Park, J. Y. Jung and H. U. Oh, "Experimental Investigation on the Feasibility of Using a Fresnel Lens as a Solar-Energy Collection System for Enhancing 

    On-Orbit Power Generation Performance", International Journal of Aerospace Engineering, Vol. 2017 (2017) 1-13

4. S. C. Kwon, M. S. Jo and H. U. Oh, "Experimental Validation of Fly-wheel Passive Launch and On-orbit Vibration Isolation System by Using a Superelastic

    SMA Mesh Washer Isolator", International Journal of Aerospace Engineering, Vol. 2017 (2017) 1-16

5. T. K. Kim, S. H. Han and H. U. Oh, "Design and Performance Evaluation of MEMS-based Spaceborne Variable Emissivity Radiator Using Movement of                     Electrified Beads", Journal of Microelectromechanical Systems, Vol. 26 No. 1 (2017) 113-119

6. H. U. Oh, M. J. Lee and T. G. Kim, "Experimental Design Validation of Tilting Calibration Mechanism by Using Shape Memory Alloy Spring Actuator",                     International Journal of Aerospace Engineering, Vol. 2017 (2017) 1-12

7. S. C. Kwon, Y. H. Jeon and H. U. Oh, "Micro-jitter Attenuation of Spaceborne Cooler by Using a Blade-type Hyperelastic Shape Memory Alloy Passive     Isolator", Cryogenics, Vol. 87 (2017) 35-48

8. S. C. Kwon and H. U. Oh, "Numerical Feasibility Study for a Spaceborne Cooler Dual-function Energy Harvesting System",

    International Journal of Aeronautical and Space Sciences, Vol. 18 No. 3 (2017) 579-587

2016

1. S. C. Kwon, S. H. Jeon and H. U. Oh, "Performance Investigation of a Novel Pseudoelastic SMA Mesh Washer Gear Wheel with Micro-jitter Attenuation

    Capability", Smart Materials and Structures, Vol. 25 No. 5 (2016) 1-14

2. S. J. Kang and H. U. Oh, "On-orbit Thermal Design and Validation of 1U Standardized CubeSat of STEP Cube Lab.", 

    International Journal of Aerospace Engineering, Vol. 2016 (2016) 1-17

3. S. C. Kwon and H. U. Oh, "Experimental Validation of Satellite Micro-jitter Management Strategy in Energy Harvesting and Vibration Isolation ",

    Sensors and actuators: A PhysicalVol. 249 (2016) 172-185

4. H. U. Oh, J. K. Lee, H. W. Ha and T. G. Kim, "Thermo-mechanical Design for On-orbit Verification of MEMS based Solid Propellant Thruster Array

    through STEP Cube Lab Mission", International Journal of Aeronautical and Space SciencesVol. 17 No. 4 (2016) 526-534

5. T. Y. Park, B. G. Chae and H. U. Oh, "Development of Electrical Power Subsystem of Cube Satellite STEP Cube Lab for Verification of Space-Relevant

    Technologies", International Journal of Aerospace System Engineering, Vol. 3 No. 2 (2016) 31-37

2015

1. S. C. Kwon, S. H. Jeon and H. U. Oh, "Performance Evaluation of Spaceborne Cryocooler Micro-vibration Isolation System Employing Pseudoelastic

    SMA Mesh Washer", Cryogenics, Vol. 67 (2015) 19-27


2. H. U. Oh and M. J. Lee, "Development of a Non-explosive Segmented Nut-type Holding and Release Mechanism for Cube Satellite Applications",
    Transaction of the Japan Society for Aeronautical and Space Sciences, Vol. 58 No. 1 (2015) 1-6


3. H. U. Oh, S. C. Kwon and S. H. Youn, "Characteristics of Spaceborne Cooler Passive Vibration Isolator by Using a Compressed Shape Memory

    Alloy Mesh Washer", Smart Materials and Structures, Vol. 24 No. 1 (2015) 1-12


4. H. U. Oh, S. H. Jeon, T. H. Kim and Y. H. Kim, "Experimental Feasibility Study for Micro-jitter Attenuation of Stepper-actuated  X-band Antenna-pointing 

    Mechanism by Using Pseudoelastic SMA Mesh Washer", Smart Materials and Structures, Vol. 24 No. 4 (2015) 1-12


5. H. U. Oh and T. Y. Park, "Experimental Feasibility Study of Concentrating Photovoltaic Power System for CubeSat Applications",
    IEEE Transactions on Aerospace and Electronic Systems, Vol. 51 No. 3 (2015) 1942-1949


6. M. J. Lee, Y. K. Lee and H. U. Oh, "Performance Evaluation of Hinge Driving Separation Nut-type Holding and Releasing Mechanism Triggered by                             Nichrome Burn Wire", International Journal of Aeronautical and Space Sciences, Vol. 16 No. 4 (2015) 602-613

 

 

2014

 

1. H. U. Oh, S. H. Jeon and S. C. Kwon, "Structural Design and Analysis of 1U Standardized STEP Cube Lab for On-orbit Verification of Fundamental

    Space Technologies", International Journal of Materials, Mechanics and Manufacturing, Vol. 2 No. 3 (2014) 239-244

 

2. C. W. Lee, H. U. Oh and T. G. Kim, “Fabrication and Performance Analysis of MEMS-based Variable Emissivity Radiator for Space Applications”,

    Journal of Physics: Conference Series, Vol. 557 (2014) 1-5

 

3. S. H. Jeon, S. E. Jang, H. M. J. Y. Cha and H. U. Oh, "Structural Design and Analysis of Pico-class Satellite named STEP Cube Lab",

    International Journal of Aerospace System Engineering, Vol. 1 No. 1 (2014) 34-43

 

 

2013


1. H. U. Oh, K. J. Lee and H. H. Choi, "Experimental Demonstration of Cryogenic Cooler Disturbance Attenuation by Non-linear Passive Isolation System",

    Transaction of the Japan Society for Aeronautical and Space Sciences, Vol. 56 No. 3 (2013) 121-128


2. H. U. Oh, K. J. Lee and M. S. Jo, "A Passive Launch and On-orbit Vibration Isolation System for the Spaceborne Cryocooler", 

    Aerospace Science and Technology, Vol. 28 No. 1 (2013) 324-331


3. H. U. Oh and Y. J. Choi, "Performance Investigation of Variable Damping Shock Absorber Combined with Conventional Semi-active Vibration Control Logics", 

    Aerospace Science and Technology, Vol. 29 No. 1 (2013) 1-6


4. H. U. Oh, S. M. Shin and C. W. Baek, "Thermal Control of Spaceborne Image Sensor Using Heat Pipe Cooling System", 

    Aerospace Science and Technology, Vol. 29 No. 1 (2013) 394-402

 

 

 

2012


1. H. U. Oh, S. M. Shin and J. M. Kim, "On-Orbit Performance Prediction of Black Body Based on Functional Test Results under Ambient Condition",
    Journal of Aerospace Engineering, Vol. 25 No. 1 (2012) 39-44


2. H. U. Oh and S. M. Shin, "Numerical Study on the Thermal Design of On-board Blackbody",

    Aerospace Science and Technology, Vol. 18 No. 1 (2012) 25-34


3. H. U. Oh, M. S. Jo, K. M. Lee and D. J. Kim, "Spaceborne Tilt Mirror Mechanism and Application of Shape Memory Alloy Actuator to Implement

    Fail-safe Function at Emergency Mode", Transaction of the Japan Society for Aeronautical and Space Sciences, Vol. 55 No. 6 (2012) 373-378

 

 

 

~2011

 

1. J. Onoda , H. U. Oh and K. Minesugi, "Semi-active Vibration Suppression of Truss Structures by Electro-rheological Fluid", 

   Acta Astronautica JournalVol. 40 No. 11 (1997) 771-779


2. J. Onoda, H. U. Oh and K. Minesugi, "Semiactive Vibration Suppression with Electrorheological-Fluid Dampers", 

   AIAA Journal, Vol. 35 No. 12 (1997) 1844-1852

3. H. U. Oh, J. Onoda and K. Minesugi, "Characteristics of a Liquid-Crystal Type ER Fluid Variable Damper for Semiactive Vibration Suppression",
    Journal of Vibration and Acoustics, Vol. 122 No. 4 (2000) 412-419

4. J. Onoda, H. U. Oh and K. Minesugi, "Improved Electrorheological-Fluid Variable Damper Designed for Semiactive Vibration Suppression",
    AIAA Journal, Vol. 38 No. 9 (2000) 1736-1741


5. H. U. Oh, J. Onoda and K. Minesugi, "An Experimental Study of a Semiactive Magneto-Rheological Fluid Variable Damper for Vibration Suppression

    Truss Structures", Smart Materials and Structures, Vol. 11 No. 1 (2002) 156-162


6. H. U. Oh and J. Onoda, "Numerical study on a Semi-active Isolator to Enhance Pointing Performance of Optical Equipment On-board Satellites".
    Transaction of the Japan Society for Aeronautical and Space Sciences, Vol. 45 No. 150 (2003) 255-260


7. H. U. Oh, J. Onoda and K. Minesugi, "Semiactive Isolator with Liquid-Crystal Type ER Fluid for Momentum-wheel Vibration Isolation",
    Journal of Vibration and Acoustics, Vol. 126 No. 2 (2004) 272-277


8. H. U. Oh, "Characteristics of a Magneto-Rheological Fluid Isolator Obtained by Permanent Magnet Arrangement",
    Smart Materials and Structures, Vol. 13 No. 3 (2004) 29-35


9. H. U. Oh, "Experimental Demonstration of an Improved Magneto-Rheological Fluid Damper for Suppression of Vibration of a Space Flexible Structure",
    Smart Materials and Structures, Vol. 13 No. 5 (2004) 1238-1244


10. H. U. Oh, K. Izawa and S. Taniwaki, "Development of Variable-Damping Isolator Using Bio-Metal Fiber for Reaction Wheel Vibration Isolation",
     Smart Materials and Structures, Vol. 14 No. 5 (2005) 928-933


11. H. U. Oh, K. Izawa, S. Taniwaki and N. Kenji, "Flywheel Vibration Isolation Test Using a Variable-Damping Isolator",

     Smart Materials and Structures, Vol. 15 No. 2 (2006) 365-370


12. H. U. Oh and Y. J. Choi, "Enhancement of Pointing Performance by Semi-active Variable Damping Isolator with Strategies for Attenuating

     Chattering Effects", Sensors and Actuators A: Physical, Vol. 165 No. 2 (2011) 385-391


13. H. U. Oh, M. K. Lee, S .M. Shin and J. S. Hong, "A Numerical and Experimental Investigation of the Thermal Control Performance of a Spaceborne

      Compressor Assembly", Cryogenics, Vol. 51 No. 9 (2011) 477-484

광주광역시 동구 필문대로 309 조선대학교 항공우주공학과 우주기술융합연구실
 
Tel: 062-230-7183, Fax: 062-230-7186, E-mail : ohu129@chosun.ac.kr
  • facebook-square
  • Twitter Square
  • Google Square

MADE BY MJ.LEE